Üdv van egy Hi8 sony kamerám amit eddig VHS- re mentettem , de már a családban lassan elütnek a videók azt CD/DVD-n kérik a felvételt . Olvastam valahol , hogy azok a kis digitalizáló kütyük csapni való minőségűek azt számítógépes digitalizálásra gondoltam .Nem vagyok nagy számítógépes és valami tanácsot szeretnék , hogy tudom ezt kivitelezni ,mi kell hozzá . Nem kell valami profi megoldás de mégis azért ne legyen sokkal rosszabb a VHS-nél .
Sziasztok!
A fenti csodakamerába keresem ezt a nyomógörgőt!
Az imént hozták javításra..
A tulaj új akkut, új kazettát vett bele mert azt hitte így jó lesz:-)
Közben kiderült, hogy eme nemes alkatrész elvándorolt valahová a gépből :-)
EBAY en találtam, de... csak van valakinek itt a tanyán a fiókban...
Köszönöm előre is!
Hi friends,
I would like to make adjustments to my Sony DSC-F717.
According to service manual, the service remote is attached via CPC jig, where a 2,5mm LANC port is mounted. I'd like to DIY a improvised jig.
Exact detail of the jig is not provided, but clearly it is a 22-pin FPC splited into many measure points and a LANC port. Also learned from the manual that LANC signal to/from CPC is splited into 2 lanes, IN and OUT, while 2,5mm LANC port only has 1 (bidirectional) data bus. I wonder if these 2 signals are mixed by additional circuits on the jig.
If someone can post a back (trace-side) photo of CPC12, the mystery will be solved and it will be much appreciated, thanks in advance!
Sziasztok.
A cimben említett fényképezőgép power gombját megnyomva, bekapcsol a kijelzője, kinyílik az objektív majd azonnal kikapcsol. Ha a setupra van hajtva a választógomb akkor működik a kijelző is és lehet állítgatni, a képeket megnézni, de ahogy átállítom fényképezésre a lencse kinyílik a kijelző elsötétül és tovább nem reagál semmire.
2700 miliamperórás aksik vannak benne. Próbáltam másik akkuval is hátha az van legyengülve, de azzal se megy pedig maximumra fel van töltve.
Mi lehet a gond vele?