Hey! Thanks for replying. So i took the motor apart and cleaned everything but it keeps doing the same thing.
Here is what i've checked:
When you turn on the washer or start a cycle, the cam moves to the prewash position. If you select prewash, the washer starts filling in that position. If prewash is not selected, the machine fills in the prewash chamber for a few seconds, and then should move to the main wash chamber.
Now, two things can happen when it's supposed to move to the main wash chamber: if the cam turns clockwise, it reaches the main wash chamber properly. If it turns anti-clockwise, it stops in a random position. In both cases the motor is energyzed 8 seconds.
This made me think that maybe the motor is controlled by time, and not by a resistance, but it turns both ways so it can't be possible.
If i remove the main gear (wich makes contact with the resistor net) the motor keeps turning. After 10 minutes the display shows "ERROR 10" (faulty motorized selector)
The motor doesn't have any resistors, just a big outer plate and a tiny inner contact, wich makes the motor stop in the prewash chamber when the main gear makes contact with it
Hey! Thanks for replying. So i took the motor apart and cleaned everything but it keeps doing the same thing.
Here is what i've checked:
When you turn on the washer or start a cycle, the cam moves to the prewash position. If you select prewash, the washer starts filling in that position. If prewash is not selected, the machine fills in the prewash chamber for a few seconds, and then should move to the main wash chamber.
Now, two things can happen when it's supposed to move to the main wash chamber: if the cam turns clockwise, it reaches the main wash chamber properly. If it turns anti-clockwise, it stops in a random position. In both cases the motor is energyzed 8 seconds.
This made me think that maybe the motor is controlled by time, and not by a resistance, but it turns both ways so it can't be possible.
If i remove the main gear (wich makes contact with the resistor net) the motor keeps turning. After 10 minutes the display shows "ERROR 10" (faulty motorized selector)
The motor doesn't have any resistors, just a big outer plate and a tiny inner contact, wich makes the motor stop in the prewash chamber when the main gear makes contact with it
Any ideas? Thanks again!