Kenwood KA-6004 capacitor C303 in unit is 100uF , in Schematic it is 1000uF
Kenwood KA-6004 Capacitor C303 in unit is 100uF, in the Schematic it is 1000uF.
I am ordering replacement capacitors for the Electrolytics, and at least one cracked 100Ohm resistor (re48 on Main Amp board), and I would like to think I am ordering parts to closely match the original. However, when I look at the label on C303 it says 100uF, and when I look at C303 on the schematic it says 1000uF.
Anyone able to confirm a working KA-6004 with a 100uF or 1000uF C303? This capacitor is between the positive (shown as 55V out) side and the negative side of the full-wave rectifier off the 45V transformer.
Thank you.