Sziasztok ! A fent emlitett hifi a következőt produkálja: a hálozatra csatlakozáskor a hangfalak égtelen hangon búgnak,nem lehet bekapcsolni.Kicseréltem a 2 db tápkondit (3300uf,63v),majd cseréltem egy stk 4182II tipusu végfokot. Úgy nézett ki minden oké,most viszont a trafó 220v felöli biztijét nyomja el ha csatlakoztatom a hálózatra,várom az ötleteket,előre is köszi.
Sziasztok!
Tulajdonképpen nem tudtam melyik fórum kategóriába írjak, de remélem itt nem zavaró. Ha esetleg mégsem jó, akkor megkérnélek pihe, hogy helyezd át légszives a megfelelő helyre. Köszönöm!
Szóval (inkább betűvel), a fent említett eszköznek (IPod Shuffle) keresném az sm-jét. Vagy bármilyen repair manualt.
![](http://www.digiexpress.us/assets/images/ipod-shuffle1.jpg.png)
Előre is köszönöm mindenkinek a segítségét!
Sziasztok!
Kaptam egy hibás Rega Elex erősítőt, a tulajdonos ki akarta dobni. Első ránézésre cserélni kell a végtranzisztorokat(Sanken 2SA1186/2SC2837 páros), a meghajtó tranzisztorokat (BC639, BC640), 2 db 0.47 ohmos emitter ellenállást, 2 db ZTX300 tranzisztort.
A kapcsolási rajzot feltöltöttem. Szerintetek érdemes foglalkozni vele?
Üdv,
Endre
Hello everyone,
I've this speaker model:
RCF art 415-A.
The power supply is faulty, no votltage out to the amplifier.
The Mosfets are blown. I've changed the mosfets and it's driver, and still have a problem.
I tried to switch on but only one of the mosfets gets hot (the one which switches the 310. There are 2 of them - Mos5 in the scheme).
Obviously I turned it off.
1) What causes it to heat?
2) Testing the VCC of the LMC555, it's only 2.7V. When taking it out of the circuit, it's 12VDC! What makes the voltage to drop. Where does the supply of the LMC555 come from? The VCC of the 555 should be around 10V, as compared with a good card.
I've changed the 555, but the problem remained. I've checked the components around, resistors and capacitors, and transistors, and seem to be OK.
4) The VCC of the Mosfet driver is 10V, but should be 12V if compared with a good card.
3) Could the trafo be damaged? Are these parts reliable or may blow up?
4) What is the purpose of the optocoupler in the circuit?
I would really appreciate any help.
I didn't find the 100% schemes for this RCF (400), but found a very similar one (The 600 version).
name and a link here to download the pdf.
DigiPRO600B
https://elektrotanya.com/db-technologies_digipro600b_sch.pdf/download.html
Regards and many thanks