Sziasztok!
A javitáshoz szükségem lenne egy kapcsolási rajzra.
A készülék egy autós magnó.TOYOTA 1801.
Előre is köszönettel!
József.
Sziasztok!
A dokumentáció https://elektrotanya.com/jvc_hx-5.pdf/download.html 49. oldalán lévő procedurát akarom végrehajtani, viszont sehol sem látom leírva az 1. lépést, amely szerint a processzort át kell állítani TEST - módba.
Valakinek sikerült már ez ?
Jó napot mindenkinek--hozzám került egy kenwood kdc8080 tipusú autórádió,amelynek nincs meg a mask key távja,ezért tettem egy másik dumpot hogy ne TRANSMIT1 legyen,most müködik is,csak a kijelző panel többet nem fordul be...a kérdés , hogy ez attól van hogy a védelem ki van kapcsolva,vagy valamilyen dump hiba? üdv!...
Hi - I have a pair of KRK VXT4 studio monitor speakers. Very expensive! When I stored them, they were working fine. When I tried to use a few days ago, one of them simply hums loudly at 50Hz. I have tried replacing the two 12000uF PSU capacitors, as I found on Google that sometimes they can become depolarised but this has not solved the problem. I am trying to find a schematic for both the main board (which has the PSU and the PA stage) and the pre-amp board. - Thanks, Kevin