Sziasztok!
Mivel lehetne egy OPT-715k2 laser egységet kiváltani? Ez egy VDO autós CD belében lakik, és gyenge. Mostam, főztem, takarítottam már mindennel, már legalábba lemezt megpörgeti, de tök kakukk..
Ráadásul egy elég ritka gyári CD, így gyakorlatilag a beszerezhetetlen kategória, plusz pár éve még egy IPOD dokkolót is ráhergeltem, így meg végképp nem szeretném kidobni :)
Az egész laser egység összes felirata: 297t8a OPT-715k2
a mechanika pedig CDC 02LX2A
szerintetek?
Sziasztok!
A következő készülék LG FFH-1920 mikró Hi-Fi nek nagy valószínűséggel a CD részegységben a fej meghibásodott.Sikerült le töltenem a Szerviz Manuált innen a tanyárol (és Nagyon Szépen Köszönőm) ,de nem specifikálják milyen típusú fej van benne.
A Kérdésem az ,hogy milyen típusú fej való hozzá?
A válaszokat előre is nagyon szépen köszönőm mindenkinek.
Üdv : Lengyel József
Sziasztok!
Adott egy JVC RV-NB52 bömbölde. Nincs benne a laser a CD-ben. Valaki járt benne.
Nem tudja valaki, mi való bele gyárilag?
Köszi!
I have a Yamaha CDX-590 CD player and it skips on some CDs - original CDs, these CDs play without problems on my other CD players.
I have changed the laser unit (KSS-210A) but this didn't solve the problem.
When I turn the player upside down, it plays the problematic CDs without a problem.
That's why I think the laser needs adjustment.
I have only a service manual for the CDX-493/593 but they should be very similar to the CDX-590.
It seems that the adjustments are done via "test mode" of the CDX-590, unfortunately there is not much information, how to exactly, in the service manual.
Here is a picture of the PCB.
http://www.volny.cz/hwtest/PCB.JPG
Here are the "test mode" sections of the service manual.
http://www.volny.cz/hwtest/TM1.GIF
http://www.volny.cz/hwtest/TM2.GIF
In "test mode" I have tried Auto adjustment mode 1, 2, 3, but I don't know if it should work fully automatic without any intervention or when the mode is fineshed and I can proceed to the next one.
So I activated mode 1, waited a while, activated mode 2, waited a while, activated mode 3, then exited test mode.
It didn't help.
Mode 1 - only a short blink of two horizontal dashes on the display and thats it
Mode 2 - started "play" without sound from a strange time 99:00 (the test CD is not so long), after a while it skips to another time, "plays" a while, then skips back and "plays" and so on, I left it about an hour and it was still going on
Mode 3 - seems to be very short as mode 1
I think I'm missing something ...
Maybe someone did this or even serviced Yamahas in an official service and can provide information how to adjust the laser?
Or maybe the problem is not the laser?