panasonic 32ps 12p táp nemindul el,cicereg és 65 volt a sorvégtranyon,sorkimenő képeltérítő ic cserélve,táp ic is kérem segítségeteket.üdv köszi segítségeteket , de ezt jó megszivtam atápba 130 voltos 3 lábu kerámia ref volt rossz .
Kedves kollégák!
A távkapcsoló szétszedése után, meglepődve láttam, hogy a nyák és a gumilap között valami zsír szerű anyag van.
Ez gyári állapot?
Mi ez, egyszerű szilikonzsír, vagy valami egyedi cucc?
Vagy esetleg egyszerűen beleöntöttek valamit?
Elég siralmas állapotban van az egész távkapcsoló, ezért szeretném átmosni alkohollal, de ha ez a kenőcs gyári megoldás, valamivel pótolnom kell.
I got a broken Panasonic that will not start. It does show the red front LED and the power supply delivers 5,3Volt standby. Only when you try to start by remote or push button on the set it will only flash the red LED and does nothing more.
After a while, the red LED will start to flash repeatedly 13 times.
Since the 5,3 Volt standby run straight to the main board I wanted to check there but no luck finding the schematics.
Any insights?
After several attempts the TV finally started and I could enter the menu screen. Normal functionality. But after switch off it takes again several attempts. What is going on ?
Hello, I am working on a panasonic tv that shuts down a few seconds after it comes on, blinks(red standby light remains on)three times pauses, and repeat the cycle. Any ideas as to what could be wrong? Thanks.