Robotic Lawn Mower
Date: 15/05/2021
Time:01:39
Model: PL-M1
Serial Number: 20184600001200303335
Firmware Version: 3.23b14
Hardware Version: v7
Firmware Date: 14/05/2021
Wifi Mac Address:
MOWER STATISTICS
Battery recharged: 168 Times
Blade running time: 11224 min
Total work time: 11873 min
Total distance: 209949 m
Boundary length: 0 m #0
| SCHEDULER |
|---|
| DAY | # | START TIME | END TIME (Extra time 0%) | BORDER CUT |
|---|
| Sunday | 1 | --:-- | --:-- | ----- |
| 2 | --:-- | --:-- | ----- |
| Monday | 1 | --:-- | --:-- | ----- |
| 2 | --:-- | --:-- | ----- |
| Tuesday | 1 | 09:00 | 09:30 | Enabled |
| 2 | --:-- | --:-- | ----- |
| Wednesday | 1 | --:-- | --:-- | ----- |
| 2 | --:-- | --:-- | ----- |
| Thursday | 1 | --:-- | --:-- | ----- |
| 2 | --:-- | --:-- | ----- |
| Friday | 1 | 09:00 | 09:30 | Enabled |
| 2 | --:-- | --:-- | ----- |
| Saturday | 1 | --:-- | --:-- | ----- |
| 2 | --:-- | --:-- | ----- |
#00001 - 15/05/2021 01:38:52 - Mower Upside Down -36.2pitch--5.6roll
#00002 - 15/05/2021 01:38:17 - Mower in idle state 17.3°C 18.80 Volt
#00003 - 15/05/2021 01:38:17 - Total statistics: 209949m, 11873min, blade on time: 11224min
#00004 - 15/05/2021 01:38:17 - Current cut statistics: 0m, 0min, blade on time: 0min, yaw: 339°
#00005 - 15/05/2021 01:38:17 - Mower blade power-off - stop request!
#00006 - 15/05/2021 01:38:17 - Stop button pressed
#00007 - 15/05/2021 01:38:16 - [LCM] - Turning left 13° Yaw:346°
#00008 - 15/05/2021 01:38:16 - [LCM] - TRAPPED! drive wheel right #1
#00009 - 15/05/2021 01:38:13 - [LCM] - zero axis Yaw:327°
#00010 - 15/05/2021 01:38:13 - [BW] Left: in[45][131], Right: in[95][131]
#00011 - 15/05/2021 01:38:12 - [LCM] - Turning right 104° Yaw:315°
#00012 - 15/05/2021 01:38:12 - [Grass cut] wire met, turning: 104.0° right, climBEER movement - [yaw: 315.2°][inclination: 5.2°]
#00013 - 15/05/2021 01:38:12 - [LCM] - queue end :) Yaw:315°
#00014 - 15/05/2021 01:38:12 - [BW] Left: out[-53][131], Right: in[96][131]
#00015 - 15/05/2021 01:38:11 - [LCM] - Turning right 3° Yaw:315°
#00016 - 15/05/2021 01:38:10 - [LCM] - Going forward 200mm Yaw:315°
#00017 - 15/05/2021 01:38:10 - Mower grass cutting
#00018 - 15/05/2021 01:38:10 - Mower leaving house
#00019 - 15/05/2021 01:38:09 - Mower blade power-on, clockwise
#00020 - 15/05/2021 01:38:03 - [LCM] - queue end :) Yaw:319°
#00021 - 15/05/2021 01:38:02 - [LCM] - Turning left 22° Yaw:341°
#00022 - 15/05/2021 01:38:01 - [BW] Left: in[96][131], Right: in[96][131]
#00023 - 15/05/2021 01:37:59 - [LCM] - Going backward 300mm Yaw:345°
#00024 - 15/05/2021 01:37:59 - Mower start yaw: 346
#00025 - 15/05/2021 01:37:59 - Mower start sequence
#00026 - 15/05/2021 01:37:59 - Start button pressed 17.2°C 18.93Volt
#00027 - 15/05/2021 01:37:53 - [BW] Left: unknow[0][0], Right: unknow[0][0]
#00028 - 15/05/2021 01:37:51 - Mower at home
#00029 - 15/05/2021 01:37:51 - Mower base found :)
#00030 - 15/05/2021 01:37:51 - Mower base detected! chk current...
#00031 - 15/05/2021 01:37:47 - [BW] Left: in[88][131], Right: in[73][131]
#00032 - 15/05/2021 01:37:47 - [BW] Left: in[51][131], Right: out[-23][131]
#00033 - 15/05/2021 01:36:35 - [Bosch IMU] init successful! fw ver: 3.2.1
#00034 - 15/05/2021 01:36:35 - [Motor][wheel right] - Firmware version: 0.85
#00035 - 15/05/2021 01:36:35 - [Motor][blade#0] - Firmware version: 0.85
#00036 - 15/05/2021 01:36:35 - [Motor][wheel left] - Firmware version: 0.85
#00037 - 15/05/2021 01:36:35 - Mower in idle state 17.2°C 18.95 Volt
#00038 - 15/05/2021 01:36:35 - [Bosch IMU] Reset
#00039 - 15/05/2021 01:36:35 - Power base released! battery voltage: 18.95Volt
#00040 - 15/05/2021 01:36:35 - [Bosch IMU] Unique ID: 5897141E50464D512020204E0B190A00
#00041 - 15/05/2021 01:36:35 - [BW] Left: out[-82][131], Right: out[-79][131]
#00042 - 15/05/2021 01:36:35 - [BW] Left: in[0][0], Right: in[0][0]
#00043 - 15/05/2021 01:36:33 - [Battery] Model detected: LA0001-2 BS: 0.0KOhm
#00044 - 15/05/2021 01:36:35 - [SNS Mcu] - Firmware version: 10.30
#00045 - 15/05/2021 01:36:35 - [UI] - Firmware version: Tube - v0.24
#00046 - 15/05/2021 01:36:33 - [CAN-bus] peripheral init successful #0
#00047 - 15/05/2021 01:36:32 - [File System] init SUCCESSFUL!
#00048 - 15/05/2021 01:36:32 - Power On by user - v: 3.23b14
#00049 - 15/05/2021 01:35:53 - Log Power on/off frequency reduced
#00050 - 15/05/2021 01:35:47 - Shutdown: powered by external source (motors/charge station) 18.95Volt
#00051 - 15/05/2021 01:35:47 - [File System] init SUCCESSFUL!
#00052 - 15/05/2021 01:35:47 - Power On by motors/charger - v: 3.23b14
#00053 - 15/05/2021 01:35:44 - Shutdown: Menu idle timer Expired
#00054 - 15/05/2021 01:35:44 - [SYSTEM] Saving Data completed!
#00055 - 15/05/2021 01:35:44 - [SYSTEM] Saving Data..
#00056 - 15/05/2021 01:35:15 - [Bosch IMU] init successful! fw ver: 3.2.1
#00057 - 15/05/2021 01:35:14 - [Motor][wheel right] - Firmware version: 0.85
#00058 - 15/05/2021 01:35:14 - [Motor][blade#0] - Firmware version: 0.85
#00059 - 15/05/2021 01:35:14 - [Motor][wheel left] - Firmware version: 0.85
#00060 - 15/05/2021 01:35:12 - Mower in idle state 17.2°C 18.95 Volt
#00061 - 15/05/2021 01:35:12 - [Bosch IMU] Reset
#00062 - 15/05/2021 01:35:12 - Power base released! battery voltage: 18.95Volt
#00063 - 15/05/2021 01:35:12 - [Bosch IMU] Unique ID: 5897141E50464D512020204E0B190A00
#00064 - 15/05/2021 01:34:49 - [BW] Left: unknow[0][0], Right: unknow[0][0]
#00065 - 15/05/2021 01:34:49 - [BW] Left: in[0][0], Right: in[0][0]
#00066 - 15/05/2021 01:35:12 - [Motor][blade#0] - Firmware update successfully completed! 0.85
#00067 - 15/05/2021 01:35:08 - [Motor][blade#0] - Firmware update started: 0.60
#00068 - 15/05/2021 01:35:08 - [Motor][wheel right] - Firmware update successfully completed! 0.85
#00069 - 15/05/2021 01:35:05 - [Motor][wheel right] - Firmware update started: 0.60
#00070 - 15/05/2021 01:35:05 - [Motor][wheel left] - Firmware update successfully completed! 0.85
#00071 - 15/05/2021 01:35:01 - [Motor][wheel left] - Firmware update started: 0.60
#00072 - 15/05/2021 01:34:49 - [SNS Mcu] - Firmware update successfully completed! 1.03
#00073 - 15/05/2021 01:34:49 - [SNS Mcu] - Firmware update started: 0.00
#00074 - 15/05/2021 01:34:49 - [SNS Mcu] - Firmware version: 0.00
#00075 - 15/05/2021 01:34:49 - [UI] - Firmware version: Tube - v0.24
#00076 - 15/05/2021 01:34:49 - [UI] - Firmware update successfully completed!
#00077 - 15/05/2021 01:34:44 - [UI] - Firmware update started: Tube - v0.00
#00078 - 15/05/2021 01:34:44 - [UI] - Firmware version: Tube - v0.00
#00079 - 15/05/2021 01:34:42 - [CAN-bus] peripheral init successful #0
#00080 - 15/05/2021 01:34:42 - Firmware Upgrade Complete!
#00081 - 15/05/2021 01:34:41 - [SYSTEM] System Log Erase Done
#00082 - 15/05/2021 01:34:41 - [File System] init SUCCESSFUL!
#00083 - 15/05/2021 01:34:41 - Power On by motors/charger - v: 3.23b14