Sziasztok.
A cimben említett fényképezőgép power gombját megnyomva, bekapcsol a kijelzője, kinyílik az objektív majd azonnal kikapcsol. Ha a setupra van hajtva a választógomb akkor működik a kijelző is és lehet állítgatni, a képeket megnézni, de ahogy átállítom fényképezésre a lencse kinyílik a kijelző elsötétül és tovább nem reagál semmire.
2700 miliamperórás aksik vannak benne. Próbáltam másik akkuval is hátha az van legyengülve, de azzal se megy pedig maximumra fel van töltve.
Mi lehet a gond vele?
Hello everybody,
Sony CCD TRV-238E camcorder has two issues, first, a wire in the harness( PD-124) is almost cut, which causes bad contact in the LCD panel, I've tried to used a sort of glue to fix it but without success, soldering the two parts is almost impossible ( see picture), the area is too tight.
Second, when the connexion for standard flexible are cut it is possible to scratch the two parts and connect them with extension wire and welding, but in the case of the CONTROL KEY BLOCK's flexible which is used to connect the CONTROL KEY BLOCK to the mainboard, connexions are not made of copper! (carbon maybe, trying to polish will destroy them!), actually, they are worn out (see picture).
Because these spare parts are no longer available in my country, please I need your advice to fix harness and CONTROL KEY BLOCK's flexible.
Hello,
recently bought this lens as "broken/for parts" item. After inspection found there is missing FPC cable, bought one from Aliexpess. Installed it, still not working. After long searching in google was able to find a repair video, that there is seen for a while that there is something with 2-wires in the slot, that is in the photos.
Here is video at the moment that the part can be seen: https://youtu.be/PjEBGFLjgM0?t=410 (from about 6:50 mins). At 10:44 is seen that the part is only in the bottom side of the slot; and nothing more detailed in the whole internet that I was able to check for about a hour.
There is magnetic field sensor - top left on the DSC07181 and on the next photo fitted on its place, so I think it should be some kind of tiny end position switch or don't know what;
any help as service manual, photo or part number will be in help.
Regards,
Milen
:help:
Kedves Kollégák!
Nincs véletlenül bontásból egy jó 2,4"-os LCD panel Sony DCS S930 fényképezőgépbe? Az S700, S730, és Olympus FE-25-nek is ugyan ez a kijelzője. Ha valakinek viszont kellene, nekem van bontásra egy Pentax Optio 50-es táphibás, de sérülésmentes mindene. Köszi, Sanya.