Translate this page:

Sziasztok Kollégák! Keresek megvételre hibás Sony DSC-S700 optika jó legyen,Sony DSC-W110 LCD jó legyen.Sokan nem kérik a fényképező javítást ezért reménykedem bár azt is tudom, hogy ragaszkodnak a roncshoz,inkább kifizeti a bevizsgálást.Kérem jelezze akinek van.Üdv:selindion

Hello, 

recently bought this lens as "broken/for parts" item. After inspection found there is missing FPC cable, bought one from Aliexpess. Installed it, still not working. After long searching in google was able to find a repair video, that there is seen for a while that there is something with 2-wires in the slot, that is in the photos.  

Here is video at the moment that the part can be seen: https://youtu.be/PjEBGFLjgM0?t=410 (from about 6:50 mins). At 10:44 is seen that the part is only in the bottom side of the slot; and nothing more detailed in the whole internet that I was able to check for about a hour. 

There is magnetic field sensor - top left on the DSC07181 and on the next photo fitted on its place, so I think it should be some kind of tiny end position switch or don't know what;

any help as service manual, photo or part number will be in help.


Regards,

Milen

Hello everybody,
Sony CCD TRV-238E camcorder has two issues, first, a wire in the harness( PD-124) is almost cut, which causes bad contact in the LCD panel, I've tried to used a sort of glue to fix it but without success, soldering the two parts is almost impossible ( see picture), the area is too tight.
Second,  when the connexion for standard flexible are cut it is possible to scratch the two parts and connect them with extension wire and welding, but in the case of the CONTROL KEY BLOCK's flexible which is used to connect the CONTROL KEY BLOCK to the mainboard, connexions are not made of copper!  (carbon maybe, trying to polish  will destroy them!), actually, they are worn out (see picture).
Because these spare parts are no longer available in my country,  please I need your advice to fix harness and CONTROL KEY BLOCK's flexible.

 

Sziasztok SONY CCD-TRV46E kamerához keresek rajzot.Probléma az, hogy erősebb fényben túl vezérlődik.Az optikában van egy kis motor ami két kis ajtóval szabályozza a beérkező fényt ezek letörtek. Köszönöm előre is a segítságet.