Sziasztok!
A tárgyban nevezett plazma tv tápján nincs meg a VA, VS feszültség.
A többi feszültség rendben.
Amit kiderítettem , hogy a VA,VS feszültségek vezérlője meg sem kapja a tápot.
A VS_ON jel kellene a Logic board-tól, de nincs.
Ha kézzel 5V-ra húzom, meg vannak a feszültségek, de azt csak kivett táppal próbáltam.
Félek, a logic board lesz a kuka. A Led kb 5mp-es időzítéssel villog.
Amúgy ki-bekapcsolásra reagál, tehát a main az megy, vagy úgy néz ki.
Köszönöm előre is a segítséget.
Üdv,
KN
Hi, my SAMSUNG UE40D5000 tv doesn' t work anymore. The red led light indicating that the tv is plugged is not powered when I plug in the tv. The original power board modem is BN44-00473B. I have checked the voltage on the connector to the mother board of the tv, and it was 0 instead of 5.3V or 13V on the different pins, with the fuse still working and no obvious overheated part on the power board and no bulging capacitor seen neither.
I have then changed the power board with a used one bought on ebay, which model BN44-00473A is said to be compatible. It has then worked perfectly 2 days until yesterday. This morning I had to move a little bit the tv, what I did very gently, and got really disappointed as I plugged it and didn't see the red led light on anymore.
Since this morning, the power board seems to be broken once more ( I have moved from my original flat 1 week ago and don't have a multimeter to check once more that the fuse is ok and what are the voltage on the connector to the mother board )
I am wondering if this new power board failure is just bad luck, 2 days after receiving this other power board circuit ( that is a used unit, not brand new) or if the mother board could have damaged it. In the first case I would send the power board back to the seller, otherwise I will probably give up as I don't have time and skills to repair the tv.
My question is : do you think the mother board or another unit connected to it, can damage the power board ?
Thanks for your help and answers !
Sziasztok! A fenti TV-monitor tápja meghibásodott. Idáig STR, 220PF 1000V, bizti,és két SMD tranz., és dióda meghibásodott, aminek kellene a tipusa, ill. rajz a táptól Az SM keresőben lévő két SM-ban nincs kép a rajzról. Tudna valaki segíteni?
Köszönettel:
Attila
Tisztelt Kollégák!
A következő a problémám, van egy Samsung UE32C6500 LED tévém ami a tegnap estig tökéletesen működött.
Reggel bekapcsoltam, és azt vettem észre hogy a HDMI bemenetei közül egyik sem megy, akár hova dugom a jelet a tv-n nem jelenik meg kép, azt érzékeli mikor beledugom a csatlakozót, ki is írja hogy jel keresés, majd semmi.
Csináltam rajta egy gyári alapra állítást, de az sem segített.
Kérlek benneteket hogy segítsetek, nagyon sajnálnám ha nem lehetne megjavítani, mert nagyon jó kis tv és nagyon szeretem!
Előre is köszönöm!
Csaba