Hi, my SAMSUNG UE40D5000 tv doesn' t work anymore. The red led light indicating that the tv is plugged is not powered when I plug in the tv. The original power board modem is BN44-00473B. I have checked the voltage on the connector to the mother board of the tv, and it was 0 instead of 5.3V or 13V on the different pins, with the fuse still working and no obvious overheated part on the power board and no bulging capacitor seen neither.
I have then changed the power board with a used one bought on ebay, which model BN44-00473A is said to be compatible. It has then worked perfectly 2 days until yesterday. This morning I had to move a little bit the tv, what I did very gently, and got really disappointed as I plugged it and didn't see the red led light on anymore.
Since this morning, the power board seems to be broken once more ( I have moved from my original flat 1 week ago and don't have a multimeter to check once more that the fuse is ok and what are the voltage on the connector to the mother board )
I am wondering if this new power board failure is just bad luck, 2 days after receiving this other power board circuit ( that is a used unit, not brand new) or if the mother board could have damaged it. In the first case I would send the power board back to the seller, otherwise I will probably give up as I don't have time and skills to repair the tv.
My question is : do you think the mother board or another unit connected to it, can damage the power board ?
Thanks for your help and answers !
Tisztelt tanyasok van 1 Grundig 100hz-es tv aminek hibas a digitalis kepkorrekcio vezerlo ic ami egy SDA9064-5.Kerestem de mar kifutott tetel nem rendelheto.Azt szeretnem kiprobali h az SDA9064-5 ic 5 SC labat kikotom es rakotok 1 masik icnek pl TDA8370-es ic 3 SC labat.Ha szerencsem van az ic tobbi resze jol muzsikal es beindul.Ha valaki csinalt mar hasonlot kerem irja meg tapasztalatait.Koszonom mindenkinek.
Tisztelt szakik.
Mindazonáltal, hogy egy rakat púpos kondi vár cserére a készülékben, azok hagyományos felirattal bírnak.
((egy 820uF 250V kondi beszerzésében-helyettesítésére tippeket kérnék))
Az X panelen lévő kondik azonosító felirata:
73423
33
2AT
ezek C4, C5, C17, C18 felirattal vannak a panelon, de a kapcsolási rajzon ezeket nem találtam, alkatrészlistában sem.
így néz ki:
http://elcodis.com/parts/1972335/VES-100M1CTR-0405.html
Az azonosításon felül kérnék segítséget, hogy ezen kódokat hogy kell "olvasni".
Köszönettel D A
Sziasztok
Azt szeretném kérdezni,hogy van-é olyan hogy kijelző kereszt referencia táblázat.Vagy valami amiből meg lehet állapítani,hogy mit mivel.
Köszönöm