Hello,
recently bought this lens as "broken/for parts" item. After inspection found there is missing FPC cable, bought one from Aliexpess. Installed it, still not working. After long searching in google was able to find a repair video, that there is seen for a while that there is something with 2-wires in the slot, that is in the photos.
Here is video at the moment that the part can be seen: https://youtu.be/PjEBGFLjgM0?t=410 (from about 6:50 mins). At 10:44 is seen that the part is only in the bottom side of the slot; and nothing more detailed in the whole internet that I was able to check for about a hour.
There is magnetic field sensor - top left on the DSC07181 and on the next photo fitted on its place, so I think it should be some kind of tiny end position switch or don't know what;
any help as service manual, photo or part number will be in help.
Regards,
Milen
Hello everybody,
Sony CCD TRV-238E camcorder has two issues, first, a wire in the harness( PD-124) is almost cut, which causes bad contact in the LCD panel, I've tried to used a sort of glue to fix it but without success, soldering the two parts is almost impossible ( see picture), the area is too tight.
Second, when the connexion for standard flexible are cut it is possible to scratch the two parts and connect them with extension wire and welding, but in the case of the CONTROL KEY BLOCK's flexible which is used to connect the CONTROL KEY BLOCK to the mainboard, connexions are not made of copper! (carbon maybe, trying to polish will destroy them!), actually, they are worn out (see picture).
Because these spare parts are no longer available in my country, please I need your advice to fix harness and CONTROL KEY BLOCK's flexible.
Üdv Mindenkinek!
Ha nem velem történik, el sem hiszem!
Kaptam egy használt kazettát, és miután betettem, újra kiadta. Ekkor nyitottam ki, és láttam, hogy a szalag totál gyűrött...
Ezután viszont a saját kazettáimat sem játszotta le. :) Két fej kitörött.
Szóval videófej csere a megoldás, amihez kérem a segítségeteket.
( beszerzési forrás, otthon panelhibával, vagy mechanikai hibával porosodó készülékből kimenthető fej...)
Kérlek. ha tudtok segítsetek! A gond nálam is az anyagiak hiánya,és szeretném viszonylag olcsón újra működőképessé tenni.
Tudom, kifutott technika, de az évek óta felvett kazetták digitalizálásához nagy segítség lenne.
Köszönettel: FEJO
Fejcsere után újra működik... :)
Üdvözlök Mindenkit!
Sony DCR-HC19E kamerához keresnék bontott kihajtható LCD kijelzőt.
Durva kezeléstől kitörtek a rögzitő csavarok. Ha valakinél lenne, kérem jelezze. A többit magánban.
Köszönöm