Üdvözlet mindenkinek
A címben szereplő kamerának az érintő kijelzőjének a bal fele nem működik.Mi lehet a probléma,találkozott már valaki ezzel a hibával?Az érintő kijelző rossz vagy ez lehet szalagkábel hiba is?Válaszokat előre is köszönöm.
Üdv:Mitu
üdv: egyik ismerősöm panaszolja, hogy címbeli kamerája fél órai működés után meleg.
Megmértem, a bal oldala 35 C-fok körül van, az alján az állványcsavarnál 42 fokot mértem egy órai üzem után.
Kérdem, ez elfogadható, vagy hibára utal?
A kamera egyébként normálisan működik.
Bálint
Hi friends,
I would like to make adjustments to my Sony DSC-F717.
According to service manual, the service remote is attached via CPC jig, where a 2,5mm LANC port is mounted. I'd like to DIY a improvised jig.
Exact detail of the jig is not provided, but clearly it is a 22-pin FPC splited into many measure points and a LANC port. Also learned from the manual that LANC signal to/from CPC is splited into 2 lanes, IN and OUT, while 2,5mm LANC port only has 1 (bidirectional) data bus. I wonder if these 2 signals are mixed by additional circuits on the jig.
If someone can post a back (trace-side) photo of CPC12, the mystery will be solved and it will be much appreciated, thanks in advance!
Sziasztok!
Sony service manualt keresek CCU-D50P vezérlőhöz és a CA-D50P kamera dokkhoz, segítségeteket kérem a témához.
Köszi Imre