Hello, I got a problem with my Sony Receiver STR-DE 225.
There´s a sudden interruption of Audio in non defined intervalls - may be once ore 6 times during appr. 5hrs operation.
Interruption does not depend on Volume. Connection cables and speakers I´ve checked.
There´s a loud crack in both speakers, display shows for short time "PROTECTION".
After switching off and on again, everything operates normal until next interruption.
I removed from the inside of the receiver a lot of dust with a vacuum cleaner, but this didn´t help.
Unfortunately Sony has no documents for this device, as it is To "old" (1996), or could give me a hint,
in what cases "PROTECTION" might appear.
Is there anyone to give me a clue? Thanks
Sziasztok!
Nagy valószinuseggel rossz a KF IC, tápja megvan bemenet megvan, kimenet nincs, lengyel fórumon is ez az IC ment el. SM-ben vannak feszültségek és ez alapján szerintem rossz az IC.
Ebay-en látom hogy van, de én nembirok külföldrôl rendelni nem vagyok .hu henem barbár középkorban vagyok .rs-ben.

CX 168 széles DIP24 tok+hütô, ilyen tokban valószinü nincs, hanem valami DIP16-os KF-ek, melyiket ajánljátok hogy bedrótozzam helyette?
Sziasztok,csak annyit szeretnék tudni hogy a Sony TA-F410 és 411 típusú erősítők között mi a különbség,mert ugyan nem böngésztem át a teljes kapcsolási rajzot,de semmilyen eltérést nem találtam a kettő között,a 410-1989 es a 411 pedig 1990 es gyártású,az előlapon a felirat elhehezkedése tér el még,de ennyi,de az is lehet,hogy csak ennyi a különbség.
Köszönöm.
Friends Sony STR DH130 goes into protection mode soon after turning on. It works for a second then can hear loud pops from speakers.
I've tried the suggested methods to fix but nothing works. Correct impedance speakers. Speakers wired correct. Good ventilation.
I've tested the output transistors in circuit and I don't see anything unusual. I may pull them to test but will wait for advice here. I also measure
about 57 volts on the emitter resistors. Seems high to me. Anyone?