Üdv!
A kamera kihajtható keresője ilyen képet produkál. Látott már valaki így meghibásodni LCD panelt? Köszi!
Üdvözlet mindenkinek
A címben szereplő kamerának az érintő kijelzőjének a bal fele nem működik.Mi lehet a probléma,találkozott már valaki ezzel a hibával?Az érintő kijelző rossz vagy ez lehet szalagkábel hiba is?Válaszokat előre is köszönöm.
Üdv:Mitu
Sziasztok!
C32:30 és C31:30 hibakódot jelez a kamera. A kazettát nehezen veszi be,/resetelni kell/ bevétel után pörgeti balra aztán jobbra próbálná, de csak hang van fizikailag nem teker ekkor adja a C32.30 hibakódod. A kazetta ajtó kapcsolója eltörött azt helyettesítettem egy nyomógombbal ideiglenesen.
Üdv.
zaza99
Hi friends,
I would like to make adjustments to my Sony DSC-F717.
According to service manual, the service remote is attached via CPC jig, where a 2,5mm LANC port is mounted. I'd like to DIY a improvised jig.
Exact detail of the jig is not provided, but clearly it is a 22-pin FPC splited into many measure points and a LANC port. Also learned from the manual that LANC signal to/from CPC is splited into 2 lanes, IN and OUT, while 2,5mm LANC port only has 1 (bidirectional) data bus. I wonder if these 2 signals are mixed by additional circuits on the jig.
If someone can post a back (trace-side) photo of CPC12, the mystery will be solved and it will be much appreciated, thanks in advance!