Sziasztok!
GRUNDIG CF-5000 típusú magnódeck javításához keresem a képen látható fogaskereket.
Üdvözlettel: Gyula!
Hi All,
Does anyone have any experience of working on this radio, its the small Grundig with a leather case designed by F.A. Porsche.
I have recently repaired one with corroded battery contacts which had obviously not worked for many years.
Its now working perfectly on FM, but MW and SW1 and SW2 have no reception, just noise.
If I leave the radio connected to a 5v power supply for many hours it does actually get some reception on AM, but its not consistent. I'm thinking the fault is somewhere in the 'front end', oscillator stage perhaps.
I have checked the AM coils and wave selector switch are OK and everything is visually in excellent condition.
Reading various reviews on this radio confirms they were sold very cheaply in the USA and many customers have complained there is little or no sensitivity on AM, whilst others say it works perfectly. This makes me wonder if there is a common fault on these which someone may know, before I start with my test equipment to try to find the problem...
Any advice would be much appreciated!
Sziasztok!
Valamelyik nap belehet kapcsolni, valamelyik nap nem, amikor bekapcsolódik akkor egész nap jó minden--ezt mondja a tulaj. Nekem nem sikerult még bekapcsolnom.
Csak a piros stby led világít, display-en semmi nincs. Gomb megnyomásakor sem erôlködik ugyanugy világit a piros led.
Van külön stby trafója ez ad +5V-ot, meg +10V-ot! ad 12V-os relé egyik lábára, a GND-t a relé másik lábára egy kis npn tranzisztor kapcsolja rá ha a processzor ad neki valoszinu +5V-ot, de 0V van a processzor MN101C15F kimeneti 52.lábán (POUT). A relé kapcsolja a nagy trafó primerjére a 230V-ot.
A gombok jók- kilehet huzni a szalagkabelt és akkor 2Mohm-os határon is szakadás van. Gombok ellenállást kapcsolnak sorba az 5V-ra, a stby gomb 19kohm-ot kapcsol rá és 3.3V lesz amíg nyomom a gombot.
Még nem mértem rá a kvarcra..
Üdv!
A fenti típusú készülék javításával küzdök. Segítséget kérnék, hátha valakinek már volt ilyen irányú tapasztalata hasonló darlington-taranzisztoros erősítőben. A rajza itt is fenn van "grundig_v210_v310_city-line_san-remo_v21_sm.pdf" néven, de belinkelem alább. Ennek a 4. oldalán van az elátkozott végfoknak a rajza.. A hiba: Az erősítő bekapcsol, relé meghúz, kis hangerőn szépen szól( kb. 20%)csak az "R" csatorna halkabb kicsit. Növelve a hangerőt (kb.40%)az "R" csatorna hangereje nem növekszik, hanem csak egyre erősebben torzít a hangerő szabályozásától függően. No meg melegszik is ilyenkor rendesen a hűtőborda. Elkezdtem méricskélni: Az R432-R433 ( 0,47 Ohm/ 4W) Emmitter ellenállásokon nulla hanegrőnél -előbbin ~148mV, -utóbbin ~251 mV-ot mérek. ( A másik oldalon ez 2-5mV) A földhöz képest a kimeneti offset -490mV, ( a relé még ennél nem kapcsol le) a másik oldalon kb.15-20mV. Gondoltam: meg van a hiba: a negatív ágban "valaki" túl van vezérelve. Csak a hibás alkatrészt nem találom. Az ellenállásokat végig mértem és jók. Tovább méricskéltem: A végfok tranzisztorokat kivettem megmértem 91- és 92-es a bétájuk, "hidegen" mérve jók. Diódákat az áramkörben ellenőrizve jónak mérem nyitó- és záróirányba is. Feszültség alatt mérve: már a T406-os ( BC880) darlingtan-tranzisztor collektorától indul a "huncutkodás" (, vagy a visszacsatolás miatt visszahat), mert ha a másik csatornában lévővel összehasonlítom, akkor a hangerő szabályozásával nagyon változik a feszültségszint, míg a jó csatornánál ez jóval kisebb mértékű. T406-ot kicseréltem ( új hiányában) a jó oldalról, de nem változott semmi.
Elakadtam. Ha van valakinek ötlete, kérem adja tovább!
http://elektrotanya.com/grundig_v210_v310_city-line_san-remo_v21_sm.pdf/download.html