sziasztok!
Hozzámkerült egy SONY HCD-RG11 amiben nem ment a cd, elvitték valakihez aki szétkapta , a tetejét úgy leszedte hogy a (19 érintkezős) szalagkábelelfelejtettem a méreteket leírni
a hossza: 190mm
szélessége 25mm (széles ami a proci laphoz volt kapcsolva elszakadt,ezt kellne pótolni beszerzési forrást keresek, vagy ha van valakinek persze nem ingyen.
előre is köszi
attila
senkinek?
Keresem a KT1060 tuner kapcsolási rajzát, kérem aki tud segítsen.
Üdvözlettel:
Feri
Kedves Tanyalakók!
Segítségeteket szeretném kérni eme két erősítővel kapcsolatban:
Beag AET226, AET227
Bármilyen infó érdekel!
A Rádió Technika 1970/6-8. számaiban ennyit írnak róla:
Sajnos ide nem tudtam feltölteni, ezért a data.hu-ra töltöttem fel!
http://data.hu/get/3361064/AET227.pdf
1,35MB az egész
I have a Onkyo DX-7333 CD player, which sometimes doesn't recognize CDs.
I don't think it's a laser pickup (KSS-213C) problem, because when it recognizes the CD, it plays it without a problem, even very scratched ones.
The next thing is, it should play CD-RWs, but it doesn't even recognize them.
I think it needs adjustment
There are two pots on the main PCB - Focus Gain R123 and Focus Offset R112.
Also there are two test points:
TP1 4 pins, first pair labelled Tracking Gain, second pair Focus Gain
TP2 2 pins labelled RF Out and VC
But in the service manual is no description, what should be measured on the test points and how to set Focus Gain and Focus Offset.
In the attachment is a cut out from the schematic, where the test points and adjustment pots are.
Please if someone knows, how to?