Hi
I am having trouble finding any information regarding this product.
The unit powers up and the output is displayed on the screen for between 0 and ten seconds, the unit then powers down, the red standby LED on the front of the unit blinks then remains off for 5 seconds then blinks again.
This cycle continues until the power is disconnected, if the power is reconnected the unit goes back in to stand by (red led steady) it will then power on again.
Also in the error mode (red led blinking) and the power button on the back of the unit is pressed twice it will power up but this does not happen if the remote is used.
I have tested various capacitors and diodes but all seems well, I have also replaced the power supply with a reconditioned unit but this has not helped.
I have been unable to obtain any service information for this product.
So any input would be most helpful.
Thank you
Stephen Fry
Üdv Mindenkinek.
Adott a címben szeplő plazma TV. Egy barátom kínlódik vele. Bekapcslás után a készenléti LED négyet villan. Ez elvileg táphibára utal. A táp típusa LSEP 1290EEHB. Javitott már valaki ilyet? Ha igen volt vele siker élménye? Előre is köszönjük a lehetséges javítási ötleteket.
Sziasztok
A Tv látszólag bekapcsol, de se háttérfény, se képtartalom, se hang. Távirányítóra reagál de kikapcsolni nem lehet. Volt már valakinek ilyen hibája ennél a típusnál?
Köszi Balázs
Tiszteletem a Tanya szorgos tagjainak!
Adott, egy TX-29AD10F készülék, melynek, A68ESF002X43 képcsövéből, eltűnt a kék szín. (Katód potenciál, nem érdekli)! Nem nagyon fűlik a fogam a cseréjéhez, de a tulaj szeretné megjavíttatni. Keresek, valamilyen beszerzési forrást, az említett képcsőhöz, ármegjelöléssel.
Válaszaitokat előre is köszönöm:
exGelkás
Picit bővítettem.
Kalex