Service manuals, schematics, eproms for electrical technicians


Type: (PDF)
16.5 MB
If you get stuck in repairing a defective appliance download this repair information for help. See below.
Good luck to the repair!

Please do not offer the downloaded file for sell only use it for personal usage!

Looking for similar sony manual?
Document preview [1st page]
SONY DSLR-A500 DSLR-A550 LEVEL-3 VER-1.1 SM service manual (1st page)
Preview of SONY DSLR-A500 DSLR-A550 LEVEL-3 VER-1.1 SM [1st page]
Click on the link for free download!
Document preview [2nd page]
SONY DSLR-A500 DSLR-A550 LEVEL-3 VER-1.1 SM service manual (2nd page)
Preview of SONY DSLR-A500 DSLR-A550 LEVEL-3 VER-1.1 SM [2nd page]
Click on the link for free download!
Please tick the box below to get download link:
  • Also known:
    SONY DSLRA-500 DSLRA500 DSLRA550 DSLRA 500 550 DSLR A500 A550 1.1 DSLR-A500 DSLR-A550
  • If you have any question about repairing write your question to the Message board. For this no need registration.
  • If the site has helped you and you also want to help others, please Upload a manual, circuit diagram or eeprom that is not yet available on the site.
    Have a nice Day!
  • See related repair forum topics below. May be help you to repair.
If you are not familiar with electronics, do not attempt to repair!
You could suffer a fatal electrical shock! Instead, contact your nearest service center!

Note! To open downloaded files you need acrobat reader or similar pdf reader program. In addition, some files are archived,
so you need WinZip or WinRar to open that files. Also some files are djvu so you need djvu viewer to open them.
These free programs can be found on this page: needed progs
If you use opera you have to disable opera turbo function to download file!
If you cannot download this file, try it with CHROME or FIREFOX browser.
Translate this page:
Relevant STILL CAMERA forum topics:
Anyone has a Sony CPC-12 (J-6082-436-A) service jig?
Hi friends,

I would like to make adjustments to my Sony DSC-F717.

According to service manual, the service remote is attached via CPC jig, where a 2,5mm LANC port is mounted. I'd like to DIY a improvised jig.
Exact detail of the jig is not provided, but clearly it is a 22-pin FPC splited into many measure points and a LANC port. Also learned from the manual that LANC signal to/from CPC is splited into 2 lanes, IN and OUT, while 2,5mm LANC port only has 1 (bidirectional) data bus. I wonder if these 2 signals are mixed by additional circuits on the jig.

If someone can post a back (trace-side) photo of CPC12, the mystery will be solved and it will be much appreciated, thanks in advance!
Sony hi8 kamera A/V jel digitalizálása
Üdv van egy Hi8 sony kamerám amit eddig VHS- re mentettem , de már a családban lassan elütnek a videók azt CD/DVD-n kérik a felvételt . Olvastam valahol , hogy azok a kis digitalizáló kütyük csapni való minőségűek azt számítógépes digitalizálásra gondoltam .Nem vagyok nagy számítógépes és valami tanácsot szeretnék , hogy tudom ezt kivitelezni ,mi kell hozzá . Nem kell valami profi megoldás de mégis azért ne legyen sokkal rosszabb a VHS-nél .
Sony PZ 18-105G SELP18105G missing part

recently bought this lens as "broken/for parts" item. After inspection found there is missing FPC cable, bought one from Aliexpess. Installed it, still not working. After long searching in google was able to find a repair video, that there is seen for a while that there is something with 2-wires in the slot, that is in the photos.  

Here is video at the moment that the part can be seen: (from about 6:50 mins). At 10:44 is seen that the part is only in the bottom side of the slot; and nothing more detailed in the whole internet that I was able to check for about a hour. 

There is magnetic field sensor - top left on the DSC07181 and on the next photo fitted on its place, so I think it should be some kind of tiny end position switch or don't know what;

any help as service manual, photo or part number will be in help.


Sony HDR-SR7E , HDD-s kamera
üdv: egyik ismerősöm panaszolja, hogy címbeli kamerája fél órai működés után meleg. Megmértem, a bal oldala 35 C-fok körül van, az alján az állványcsavarnál 42 fokot mértem egy órai üzem után. Kérdem, ez elfogadható, vagy hibára utal? A kamera egyébként normálisan működik. Bálint
Similar manuals:
If you want to join us and get repairing help please sign in or sign up by completing a simple electrical test
or write your question to the Message board without registration.
You can write in English language into the forum (not only in Hungarian)!

E-Waste Reduce