Sziasztok Kollégák!
Keresek megvételre hibás Sony DSC-S700 optika jó legyen,Sony DSC-W110 LCD jó legyen.Sokan nem kérik a fényképező javítást ezért reménykedem bár azt is tudom,
hogy ragaszkodnak a roncshoz,inkább kifizeti a bevizsgálást.Kérem jelezze akinek van.Üdv:selindion
Sziasztok a fent említett kamera miért szakítja el a szalagot a tekerés végén illetve ha a végén van akkor behelyezés után?
Már 3x ragasztottam meg a kazettát.
Üdv Gabee.
Sziasztok!
Sony service manualt keresek CCU-D50P vezérlőhöz és a CA-D50P kamera dokkhoz, segítségeteket kérem a témához.
Köszi Imre
Hi friends,
I would like to make adjustments to my Sony DSC-F717.
According to service manual, the service remote is attached via CPC jig, where a 2,5mm LANC port is mounted. I'd like to DIY a improvised jig.
Exact detail of the jig is not provided, but clearly it is a 22-pin FPC splited into many measure points and a LANC port. Also learned from the manual that LANC signal to/from CPC is splited into 2 lanes, IN and OUT, while 2,5mm LANC port only has 1 (bidirectional) data bus. I wonder if these 2 signals are mixed by additional circuits on the jig.
If someone can post a back (trace-side) photo of CPC12, the mystery will be solved and it will be much appreciated, thanks in advance!