I have a problem with the Tektronix 7633rd Readout is not working. Displays only the spot, (no time base on the screen), from time to time, jump to the next position where it should be readout. After adjustment knob charcter scan, there's a readout, but the characters were, or blurred, or not drawn to the end - in pieces, imposed on themselves. The readout is off everything works.
For all kinds of advice I would be very grateful.
Sziasztok!
A fenti tárolócsöves szkóp egy ismerősömé. Normál (nem tárolós) módban hibátlan, viszont ha bekapcsolom a tároló módot felvillan az ernyő, de nem tárol. Továbbra is úgy működik, mint nem tárolós módba, de a vonal két végén van egy-egy kis pamacs (folt). Előző nap még működöt, minden átmenet nélkül romlott el. Igazából azt sem tudom pontosan, hogy mi a tároló cső működési elve. Az SM alapján minden tápfeszültség jónak tűnik. A csőfoglalaton és a külön csatlakozón is minden fesz megfelel az SM-nek. Itt elakadtam. Jól jönne valami ötlet. A kapcsolók és a kezelőszervek jók.
Hello.
This is my first post on the forum.
I have a defective meter Tektronix DC502 Frequency Option1. SM fits the DC501. The damage is that it always displays "1111111". Generator 5MHz is operational. 7490 dividers as well. Unless the system is damaged 74LS112 U165. On its output there does not appear, regardless of whether the generator is working or push reset. Can anyone confirm this?
Sorry for my English, I use google translate.
Sziasztok!
Van egy ilyen gépem és a következő hiba, hogy lassabb időnél szaggatot a jel.
Szerviz leírásom van hozzá. Tápot átnézte. Hol érdemes elkezdeni a hiba keresését?