PANASONIC TXP42G20E szoftver

6 posts / 0 new

Last post

2015, February 3 - 20:23

Urmas

11 years 7 months

Kas valaki megtalálja PANASONIC TXP42G20E szoftver? :help:

Comments

2015, February 3 - 21:22

#273816

Urmas

11 years 7 months

Hello.
Sorry for my English, I use a online-translator.
There are owners of the European TX-P42G20E model?
I hope for your help. Please copy TV settings(software) to the SD-card and send files to me.

2015, February 3 - 21:31

[Urmas: #273816] #273818

uniman

13 years 10 months

***

Hello Urmas.

See on hea ! (Ei?): http://av.jpn.support.panasonic.com/share/eww/en/tv/2013/P102_2518.zip

Üdv.: Uniman

2015, February 4 - 01:08

[uniman: #273818] #273834

Urmas

11 years 7 months

I replaced TX-P42G20E mainboard.
In the new board is soft TX-P50G20E.
This is not compatibly.I need soft to TX-P42G20E.

File csatolás:

panasonic_txp42g20e_data_copy_by_sd_card(1).png

2015, February 4 - 00:55

[uniman: #273818] #273833

Urmas

11 years 7 months

Thanks.
This is update only.
http://av.jpn.support.panasonic.com/support/global/cs/tv/download/fw/eur...

2015, February 4 - 14:31

[Urmas: #273833] #273890

tw2005

10 years 9 months

if you can somehow find a tx-p50g20e service manual, compare these

IC1101 TVRR326

IC4205 TVRR333

IC8921 TVRR329

IC8950 TVRR320

IC9304 TVRR330

which are your 42" to the same in the 50" and swap any that are different number.

failing that, try swap 8 pin eeprom IC9304 from old 42" board to the 50. this is the panel address data . be warned if you had a 1 blink SOS on original 42", a bad one of these can cause that so if it's bad it will transfer across. You can oreder replacement programmed eeprom

data copy to SD will do nothing except to transfer settings, that is preferences and channels stored. you can forget about IC8921, I expect that is the same in 50" models which is good since it has 48 pins. the rest are easy 8pin so swapping all of those should get it to your old board but it may only need the one I suggested.

I have converted a 50" New zealand board to a 42" Australian board doing this and it worked except I discovered that panel eeprom was corrupt and turned working 50 in to 1 blink. ordered replacement from panasonic and tv has been going strong for 12 months now.

good luck

You are here

PANASONIC TXP42G20E szoftver