You are here

Sony PVM-14M4A PAL60? NTSC50? Can I force the colour system?

7 posts / 0 new
Last post
phreak97
phreak97 picture

I have just bought a Sony PVM-14M4A broadcast monitor and it works great except it wont do NTSC at 50Hz, it just shows a monochrome image. I have not tried PAL60 yet but that will probably have the same problem.

Can I override the automatic colour system setting somehow?

Comments
phreak97
phreak97 picture

From the schematic ic101 has outputs controlling secam, pal/ntsc and 50/60hz separately, I'm going to see if i can disconnect the two colour system lines from the ic and switch them manually. Hopefully it'll work.. I dont need /secam so I'll hold that line high then install a switch for pal/ntsc..

0

phreak97
phreak97 picture

Thanks, I know that I can use rgb or component but there are a number of consoles which don't have those outputs.
Can I somehow modify the monitor to manually select the colour system?
Thanks

0

phreak97
phreak97 picture

I'm using it with video game consoles, many newer systems (gamecube, dreamcast, ps2, xbox etc) are better played at PAL60. The NTSC50 signal I had was coming from a Japanese Sega Saturn running a PAL game (modded console)

0

Jaca
Jaca picture
*****

Hi!

As I know, the standar is PAL50 and Secam60. If You have component output os SVHS , use it.

Üdv: Jácint

0

Gaben
Gaben picture

Hi!

I have PVM14N1 monitor. It only accept NTSC 60 Hz, PaL 50Hz. NTSC playback on DV PAL cameras(NTSC playback on PAL tv mode)is B/W on this monitor. Switch your player to NTSC, if it's possible!

G

0

Jaca
Jaca picture
*****

Hi!

http://www.acuson.it/schedepdf/g8mNw5Pjue_PVM-14M2E(brch).pdf
It's write, "The PVM-M Series accepts PAL, SECAM and
NTSC signals. NTSC4.43 can also be reproduced."
What was the video source?

Üdv: Jácint

0